Raymarine CCM-516W Digital Switch Module
The CCM-516 W is for 12 or 24 volt digital switching and has 16 digital inputs, 16 analogue inputs, 2 current inputs, 12 10 amp outputs, 4 18 amp outputs, 16 dimmer outputs, 4 inverted outputs, No wiper control outputs and 30 wireless inputs.
- Power: 12/24V
- Digital Inputs: 16
- Analogue Inputs: 16
- Current Inputs: 2
- 10A Outputs: 12
- 18A Outputs: 4
- Dimmer Outputs: 16
- Inverted Outputs: 4
- Common Ground: 2
What is Digital Switching?
Digital Switching by Raymarine brings all of the power and convenience of advanced home automation to your boat. Digital Switching allows you to control onboard electrical and electronic systems like lighting, air-conditioning, navigation lights, wipers, horns, entertainment systems, security systems and much more from your network-connected multifunction display, smartphone or tablet.
Digital Switching by Raymarine replaces the standard mechanical circuit breakers and switches with a state-of-the-art digital power distribution. This system not only offers convenience and ease-of-use, it also delivers on the promise of seamless, reliable operation as well as simple and cost effective installation.
Graphical Interface
- Assets for every type of circuit switch or monitor
- Fully customisable screens. Assets may be dragged and dropped into any configuration.
- Screens can be personalised by uploading boat images
Digital Switching: Elegant Simplicity
Instead of bulky and expensive switch panels, the Raymarine Digital Switching system uses rugged and compact Digital Circuit Control Modules (CCMs). Each CCM supports multiple circuits that are customised to meet the exact needs of the equipment being controlled.
Each CCM connects to the vessel's existing NMEA2000 network backbone enabling it to communicate with the other CCMs and Multifunction Displays onboard. This flexible network architecture enables the CCMs to be mounted nearby to the equipment they are controlling. This significantly cuts down on the amount of cabling required to be installed onboard the vessel.
This benefits the boat builder and owner by creating a system that is simpler to install and troubleshoot than traditionally switched systems. Significant cost savings can easily be realised due to faster installation and reduced amount of cable required to wire the vessel's systems.
In addition to wired controls, the Raymarine Digital Switching system also supports ENOcean wireless, energy harvesting switches and sensors. Completely freed from the constraints of wires, ENOcean wireless devices bring a whole new level of freedom and flexibility to yacht system design.