Fusion Apollo 8 Channel Marine Amplifier 2400W
The Apollo amplifiers are designed to produce impressive power with less drain on the battery. This 8 channel amplifier with 150-watt RMS per channel can power up to eight pairs of speakers or four pairs of speakers and two subwoofers. It includes high-power mode adapters for simple bridging to increase power.
- Keep the music going for longer without draining the battery as quickly
- No more manual adjustments to the audio settings. The Easy Tune feature does it automatically
- A glance at the LED indicators identify if the amplifiers have a short or if they’re overheating
- These amps have less distortion and noise, enjoy quality audio
- Mounting brackets are included for simple installation
- Don’t worry about potential overheating damage with ignition protection design
Technical Specifications
XGeneral | |
---|---|
Dimensions without bracket | 297 x 180 x 45mm (11.69" x 7.06" x 1.75") |
Dimensions with bracket | 297 x 180 x 50mm (11.69" x 7.06" x 2.13") |
Weight | 2.7Kg (5.95lb) |
Waterproof Rating | IPX2 |
Amplifier Class | Class-D |
CEA-2006 Power Rating | 150 Watt RMS x 8 @ 14.4V input - 4 Ohm <1% THD |
Total Rated Power Output - 2 Ohm | 290 Watt RMS x 8 @ 14.4V input - 2 Ohm <1% THD |
Peak Power | 580 Watt RMS x 4 @ 14.4v input - 4 ohm Bridged <1% THD |
Total Rated Power Output - 4Ohm Bridged | 1,800 Watts |
Input Sesitivity | 1.3V RMS |
Input Impedance | 22k Ohm |
Operating Voltage | 10.8V - 16V DC |
Current Consumption (standby) | <5mA @ 14.4V input |
Current draw, On no audio | <1.32A @14.4V input |
Power-cable fuse or circuit breaker rating | 85A Electronic Fuse |
Ignition Safety Protected (SAE J1171) | Yes |
Protection Circuits | Reverse voltage Input under/over voltage Over temperature Output short circuit |
Operating Temperature Range | 0°C to 50°C |
Warranty | 3 Years |
It's The Difference Between Hearing The Music And Feeling It
These efficient, easy-to-install amplifiers work with any compatible Fusion stereo system, Choose from monoblock, multichannel and zone amplifier options. This 8 channel amplifier with 150-watt RMS per channel can power up to eight pairs of speakers or four pairs of speakers and two subwoofers. It includes high-power mode adapters for simple bridging to increase power.
high-quality Sound Made Easy
Power and efficiency - The Apollo amplifiers are designed to produce impressive power with less drain on the battery. The monoblock produces 650-watt RMS and the 4/6/8 channel amplifiers produce 150-watt RMS per channel.
Easy tune feature - These amplifiers use the Easy Tune feature, which automatically regulates audio settings. Get the best quality sound without making manual adjustments.
Less distortion - Some amplifiers distort audio when they add power. These are specifically designed with minimal distortion and noise, enjoy high-quality audio, even at higher volumes.
Superior Design
Led Indicators - Identify electrical issues at a glance. These indicator lights will show issues with electrical currents and shorts as well as temperature.
Mounting brackets - Easily install the amplifiers on board with the included mounting brackets.
Ignition protected - The ignition protected design helps prevent potential damage from overheating.
Conformal-coated PCBS - The amplifier’s circuit board has been specially coated to provide extra protection from the marine elements.
2 ohm stable - Connect up to two speakers per channel, increasing setup options.
Fusion True-Marine design - The amplifiers are designed to last season after season. They have been tested to a high level of protection against salt fog, temperature, vibration and UV.
In The Box
- One Apollo 8 channel amplifier
- One mounting bracket
- One power connector
- Four speaker connectors with high power mode adaptors
- Four 8-gauge, flat head self-tapping screws
- Four 8-gauge, pan head self-tapping screws (for mounting bracket)
- Four screw covers
- Mounting template
- Installation instructions
- Important safety and product information (ISPI)