Garmin Airmar R111LH In-hull 2KW Transducer
This in-hull or pocket mounted transducer uses narrow beams at low/high frequencies to display depth and temperature data to the Garmin Marine Network via a compatible sonar, such as the GSD 26.
Note: In-hull installation not recommended for cored-hull vessels.
- Transducer Frequency: CHIRP Low: 38-75 kHz, CHIRP High: 130-210 kHz
- Transducer Power: 2 kW
- Transducer Beamwidth: 10° x 19° / 4° - 8°
- Transducer Max Depth: 6,000 ft.
- Cable Length: 49 ft.
- Records: Depth and Temperature
- Connector: None (Bare wires)
- Supported Deadrise Angles: 0° - 25° degree deadrise
This in-hull or pocket mounted transducer uses narrow beams at low/high frequencies to display depth and temperature data to the Garmin Marine Network via a compatible sonar, such as the GSD 26.
Designed to allow both traditional and Spread Spectrum scanning, this 2 kW barewire, plastic transducer has a maximum depth of 8,000 ft; an operating frequency of 38 to 75 kHz and 130 to 210 kHz; and a beamwidth of 10x19 degrees. The in-hull mounts on a 0-25° deadrise angle; the pocket mount is installation dependent.
Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging the boat.
