Airmar 12m B175H 12degree Depth Temperature XIDT 130-210D kHz NC
Airmar 41-535-1-02 B175H 12' Tilted Thru-Hull DT Transducer with Bare ends cable
12' tilted version for 16' to 24' hull deadrise
Airmar’s low profile Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles. The High frequency band delivers a narrow beamwidth, excellent for pinpointing fish holding tight to wrecks, reefs and other structures. High frequency also delivers amazing target separation on baitfish and schooling gamefish. The B175H delivers up to 80 kHz of total bandwidth in just one installation, and provides superior shallow water performance and bottom detail.
The B175H transmits across High Frequency 130 to 210 kHz and the tilted element transducers have the element fixed at either a 20°, 12° or 0° angle within the transducer housing. Because the transducer is installed almost flush to the hull, when the transducer is installed the tilt corrects for the hull deadrise and orients the ceramic element horizontally to assure maximum echo returns to the transducer.
- Depth and fast-response water-temperature sensor
- 1 kW with a maximum depth of 304 m (1000')
- High Frequency: 130 kHz to 210 kHz
- 10° to 6° beamwidth
- 80 kHz of total bandwidth from one transducer
- High frequency provides superior shallow water performance, bottom detail and fish target separation
- Recommended boat size: Up to 11 m (36')
- Bronze housing for use on stepped, planing or displacement hulls in fiberglass or wood
- High performance, low-profile thru-hull housing provides good resolution at speed when installed properly
- Exclusive Xducer ID technology
